 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CRO2565A 9939 Via Pasar * San Diego, CA 92126 TEL (858) 621-2700 FAX (858) 621-2722 VOLTAGE CONTROLLED OSCILLATOR Rev A1 PHASE NOISE (1 Hz BW, typical) -60 -70 (f) (dBc/Hz) -80 -90 -100 -110 -120 -130 -140 1 E+3 FEATURES * Frequency Range: 2350 - 2780 MHz * Tuning Voltage: 1-14 Vdc * MINI-16 - Style Package APPLICATIONS * Digital Radio Equipment * Fixed Wireless Access * Satellite Communication Systems PERFORMANCE SPECIFICATIONS Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW, typ.) Harmonic Suppression (2nd, typ.) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance (max.) Pushing Pulling (14 dB Return Loss, Any Phase) 10 E+3 100 E+3 OFFSET (Hz) VALUE 2350 - 2780 -104 -13 1-14 40 53 50 50 <4 <3 -40 to 85 MINI-16 6 24 APPLICATION NOTES Vdc mA pF MHz/V MHz C UNITS MHz dBc/Hz dBc Vdc MHz/V dBm Operating Temperature Range Package Style POWER SUPPLY REQUIREMENTS Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) All specifications are typical unless otherwise noted and subject to change without notice. * AN-100/1 : Mounting and Grounding of VCOs * AN-102 : Proper Output Loading of VCOs * AN-107 : How to Solder Z-COMM VCOs NOTES: (c) Z-Communications, Inc. Page 1 All rights reserved LOW COST - HIGH PERFORMANCE VOLTAGE CONTROLLED OSCILLATOR TUNING CURVE, typ. 3000 2900 CRO2565A PAGE 2 FREQUENCY (MHz) 2800 2700 2600 2500 2400 2300 2200 2100 2000 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 85 25 -40 c c c TUNING VOLTAGE (Vdc) POWER CURVE, typ. POWER OUTPUT (dBm) 10 9 8 7 6 5 4 3 2 1 0 2268 2328 2379 2426 2470 2510 2548 2588 2624 2659 2691 2721 2749 2776 2799 25 c FREQUENCY (MHz) PHYSICAL DIMENSIONS TYPICAL OF ALL PADS SEE NOTE 3 MINI-16 415-0061 REV. D (DRAWING NOT TO SCALE) .070 .037 .031 .026 0.220 0.115 0.320 0.420 0.475 0.000 0.500 .052 .114 0.500 0.475 P2 DETAIL A 0.415 0.405 P1=VT P2=RF OUT P3=Vcc TABS RANGE: SEE NOTE 5. (4 PLACES) 0.305 P3 0.315 -.005 .465 0.205 0.215 BOTTOM VIEW 0.105 0.025 0.000 0.025 0.085 0.185 P1 NOTES: 1. THE INSIDE RADIUS OF ALL 16 HALF HOLES AT THE PERIMETER OF THE BOARD ARE PLATED TO PROVIDE A SURFACE FOR THE ATTACHMENT OF THE VCO TO A PCB, IN 13 LOCATIONS, WITH 3 PADS BEING USED FOR ELECTROMECHANICAL INTERFACE. 16 SOLDER LOCATIONS REQUIRED. 2. THE SURFACE OF THE SHIELD IS TIN PLATED AND MAY BE SOLDERED TO. THE SHIELD'S BASE METAL IS COLD ROLLED STEEL. 3. THE GROUND PLANE IS GROUND AND ATTACHES TO A GROUND TRACK ON THE UPPER SIDE OF THE BOARD AS WELL AS THE SHIELD BY PTH. 4. UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES. 5. UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS FOLLOWS: TOLERANCES .XXX= .010 0.115 SEE DETAIL 'A' .220 .034 0.000 .070 TYP .150 TYP 0.285 GROUND PLANE SOLDER PLATED 0.385 0.500 (c) Z-Communications, Inc. Page 2 Printed in the U.S.A. |
Price & Availability of CRO2565A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |